Over the past two decades, the focus of medical aesthetics technology has gradually shifted from minimally invasive to non-invasive procedures. This is due to people's increasing emphasis on skin improvement and their high demands for safety and health. Throughout this evolution, fractional CO2 lasers have consistently held a central position in the field of skin reconstruction. As the standard laser technology for treating photoaging, acne scars, surgical scars, and deep wrinkles, fractional CO2 lasers stimulate collagen remodeling by creating tiny thermal damage zones (MTZs), while significantly shortening the recovery period thanks to the rapid repair capabilities of surrounding undamaged tissue.
Entering 2026, the global medical aesthetics device market exhibits three significant trends:
- Technological innovation and advancement. Manufacturers are striving to find a better balance between therapeutic efficacy and patient comfort;
- Treatment combination. For example, the synergistic application of CO2 lasers with radiofrequency or other light energy sources has become a hot topic;
- Globalization of regulatory compliance. The full implementation of the EU Medical Device Regulation (MDR) places higher demands on manufacturers' R&D and certification capabilities.
Based on these market trends, this article selects five of the most influential Fractional CO2 laser device manufacturers in the current market and provides a general overview.
As a world-renowned pioneer in dermatological laser technology, DEKA holds a pivotal position in the European medical aesthetics market. DEKA products not only pursue clinical efficacy but also emphasize the dual experience of doctors and patients during treatment. Its Tetra Pro CO2 laser is renowned for its high-end, customizable pulse technology.
Core Product: Tetra Pro
The Tetra Pro is DEKA's multi-functional CO2 laser system. It utilizes a radiofrequency-excited metal tube with a power output of 40W and offers a variety of skin resurfacing treatments, including the award-winning CoolPeel® cold ablation therapy.
The Tetra Pro is unique in that it is the first CO2 laser equipped with a Moveo dynamic mode, allowing operation on mixed areas and sites requiring rapid treatment.
Versatility:
This advanced system boasts greater power and a larger scanning area than its predecessors, the SmartXide Tetra and DOT CO2 lasers, enabling precise and personalized treatment tailored to each patient's needs. Whether for superficial periorbital care, improvement of sagging skin, removal of acne scars, or deep wrinkle reduction, the DEKA Tetra PRO laser delivers precise treatment and unparalleled results.
High Efficiency and Precision:
- The addition of Moveo technology, with its dynamic treatment technology, significantly improves treatment speed.
- The large 20x20 spot size allows for rapid coverage of large areas (back, chest), greatly saving treatment time.
- The innovative "spray" mode minimizes spot overlap, thereby maximizing treatment speed.
Multiple Pulse Modes:
This is a core highlight of the Tetra PRO system. DEKA's unique Pulse Shape Design™ technology provides complete control over the duration, energy, and pulse shape of CO2. The DOT scanner offers three segmented pulse modes: High Pulse (HP), DEKA Pulse (DP), and Conventional Smart Pulse (SP). Furthermore, the Tetra PRO laser also features a continuous wave (CW) mode for manual surgical treatment.
Unlike other manufacturers focused on pure CO2 wavelengths, Newangie's strength lies in its unique dual-wavelength laser platform (10600nm and 1550nm). Originating from China, Newangie has pioneered new application scenarios in areas such as intimate rejuvenation thanks to its "dual-wavelength, multi-mode" technology. While its Er:YAG laser is also renowned in the ablative field, its CO2 module maintains strong competitiveness in deep heating and tissue tightening thanks to its unique pulse structure design.
Product Model: BMFR19
Dual Wavelength:
The dual-wavelength design allows Newangie's 2 in 1 fractional CO2 erbium glass laser to be used for both deep treatments such as scar removal, shaping, and skin tightening, and also to act on the skin's surface to improve skin texture, reduce wrinkles, and repair skin. This provides both non-ablative and ablative treatments for different skin conditions, improving skin texture and ensuring skin regeneration.
Multi-Mode:
This Newangie device comes equipped with a variety of different working heads, combined with multiple available modes such as fractional, cutting, and intimate modes, to meet the treatment needs of various skin problems. Each working head has a different function, allowing patients to select the appropriate treatment mode and energy parameters based on their specific symptoms and needs.
Safe and Reliable:
Newangie laser devices meet international standards and offer FDA/CE/ISO certifications, ensuring high performance and safety. Furthermore, the cooling system provides a comfortable treatment experience and guarantees patient safety, preventing damage to surrounding skin tissue. This is why the Newangie 2-in-1 fractional CO2 laser device is a bestseller in the global market.
While Lumenis is a global company, it boasts a strong and well-established operational system in Europe. In 2004, the company pioneered the application of fractional photothermolysis in ablative lasers with its ActiveFX and DeepFX technologies. For over two decades, Lumenis has maintained its significant position in the medical aesthetics market.
Core Product: ULTRApulse® Alpha
The Lumenis ULTRApulse Alpha is an advanced high-energy, short-pulse CO2 laser. This laser system is specifically designed for skin regeneration, scar repair, and advanced skin rejuvenation. It significantly improves wrinkles, fine lines, acne scars, and skin tone, typically offering shorter recovery times and less discomfort compared to other technologies.
UltraPulse® Patented Technology:
The core of this technology lies in its ability to compress energy into extremely short pulses, below the skin's thermal relaxation time, thereby minimizing thermal damage to surrounding tissues and achieving precise vaporization. This provides an unparalleled safety advantage for treating delicate areas such as the eyelids.
Diverse Handpiece Combinations:
The UltraPulse Alpha typically comes with multiple scanning handpieces for vaporization (ActiveFX), deep coagulation (DeepFX), and microdermabrasion (SCAAR FX). This modular design allows a single device to handle a full range of treatments, from periorbital rejuvenation to severe acne scars and even surgical scar repair.
Real-Time Dynamic Energy Monitoring:
The system's built-in intelligent feedback system continuously monitors the actual output energy of each pulse, ensuring that the output energy remains constant regardless of the treatment density and depth selected by the operator, eliminating differences in efficacy caused by energy decay or instability.
Having completed its merger in 2025, Cynosure Lutronic has rapidly established its leading position in the global high-end medical aesthetics market, leveraging the combined expertise of both companies in picosecond lasers and fractional laser technology. The merged group boasts the industry's broadest product portfolio, maintaining extremely high penetration rates in North America, Europe, and the Asia-Pacific market.
Core Product: Mosaic 3D™
Mosaic 3D™ is Cynosure Lutronic's flagship next-generation non-ablative fractional laser platform. While inherently "non-ablative," its technology platform employs advanced control algorithms previously only used in high-power ablative devices, elevating skin resurfacing to a whole new level.
The Mosaic 3D device seamlessly integrates air-cooled rolling and sapphire-tipped point pressure technology, creating a powerful, efficient, and convenient platform. With its integrated cooling system and customizable energy output, the Mosaic 3D system can safely and effectively treat sensitive areas such as the periorbital region, as well as other parts of the face and body. This approach improves treatment effectiveness, safety, and patient comfort while reducing pain.
Furthermore, 3D Controlled Chaos Technology™ (3D CCT) optimizes the distribution and depth of multi-level microbeams, reducing the risk of overall thermal effects and enabling truly personalized, layered treatment. This provides a more precise solution for complex skin problems involving both uneven epidermal texture and deep dermal scarring.
Alma Lasers, a renowned Israeli manufacturer of medical aesthetic devices, has long been known for its technological innovation and diversified energy platforms (lasers, intense pulsed light, radiofrequency). In the global medical aesthetics market, Alma is highly regarded by beauty institutions and clinics for its high cost-effectiveness and stable product performance.
Core Product: Alma Pixel™
This device utilizes advanced technology that has undergone in-depth research and clinical validation to provide patients with precise and effective solutions to skin problems, making it a powerful tool for comprehensive skincare.
It can be used in conjunction with the PixelPeel™ treatment. Alma's PixelPeel™ is a safe and effective skin rejuvenation therapy that gently removes dull and damaged skin, improving skin texture and tone. You can achieve a smoother, brighter complexion in less than five minutes, with a short recovery period.
During treatment, different patients have different skin moisture content and tissue density. Alma's system can monitor tissue impedance in real time and automatically adjust energy output parameters to ensure that the energy always accurately targets the target, effectively avoiding the potential risk of burns.
As medical aesthetic technology develops and focuses more on patients' personalized needs, ordinary equipment can no longer meet market trends. This is a major driving force behind the continuous innovation of advanced technologies and the emergence of new aesthetic techniques. In the highly competitive aesthetic market, major manufacturers are committed to developing more precise and advanced technologies that meet customer needs, which places a significant emphasis on the performance and quality of medical aesthetic equipment.
For practitioners in the medical aesthetic industry, choosing a manufacturer's equipment is essentially choosing its clinical treatment effectiveness. In today's increasingly homogenized technology landscape, the true value of equipment lies in its ability to help doctors solve patients' actual problems more efficiently and accurately while ensuring safety. The five manufacturers I've listed are leading brands in the aesthetic industry. If you are troubled by skin problems or want to take your business to the next level, you can use this as a reference.
